| Motor |
split-pole, 25 Watts
60 - 1600 min-1
Softstart, microprocessor controlled |
| Display |
4 digit 7 segment-LED display |
| Hotplate |
Ceran 135x135 mm. |
| Heating Power |
600 watts |
| Motor Specification |
• Microprocessor controlled
• Soft start logic
• Steplessly adjustable, 50 - 1600 rpm
• Split-pole, 40 watts |
| Temperature Control |
• Microprocessor controlled (PID Control)
• Pt100 probe adjustable in 1°C Steps
• Hotplate adjustable in 1°C Steps up to 500°C
• Programmable probe temperature (Pt100)
• Programmable hotplate temperature
• Programmable safety temperature |
| Temperature range heated medium |
Up to 250°C |
| Safety System |
Detects and protects against the following hazardous situations: • Hotplate failure (hotplate exceeds max. allowed temperature)
• Probe failure (disconnection or break of Pt100 probe)
• Detection of out-of-liquid condition, e.g. stirring vessel breaks
• Differential safety cut-out (external probe senses an extreme fall in temperature of liquid being stirred/heated)
• Triac failure |
| Switch-off Time Delay |
Programmable switch-off time delay
min. delay: 1 minute
max. delay: 999 minutes |
| Temperature Sensor |
Hotplate: Thermocouple
External: Platinum Resistance Sensor (Pt100) |
| Setpoint resolution hot plate |
1°C / 1K (1°F in Fahrenheit Mode) |
| Setpoint resolution Pt100 Probe |
1°C / 1K (1°F in Fahrenheit Mode) |
| Typical Temperature Stability With Pt100 Use |
± 0.4 °C |
| Recommended Stirring Bar |
Length: 55mm (30-70mm)
Diameter: 10mm (5-12mm) |
| Permissible Ambient Temperature |
5 - 40 °C |
| Permissible Humidity |
80 % RH |
| Safety Class Acc. To DIN 40050 |
IP32 |
| Case Dimensions WxDxH |
145 x 210 x 100 mm. |
| Weight |
2.6 kg. |
